Home | About Us | Products | Contact | Enquiry

Orthopaedic Implants

Orthopaedic Instruments

Home » Orthopaedic Implants » Bone Screws

Bone Screws

Bone Screws	INSTRUMENTS FOR BONE SCREWS
Cortical Screws Cancellous Screws Cancellous Cannulated Screws Malleolar Screws Shaft Screws Ashnis Screws	Instruments for Bone Screws Instrument Set for Large Cannulated 7.0mm Screw Ashnis Instrument Set

Cortical Screws

Cortical Screws for 4.5mm

Length: 14mm To 72mm With 2mm Difference
Also Available in Self Tapping

Cortical Screws for 2.7mm

Length: 06mm To 40mm With 2mm Difference
Also Available in Self Tapping

Cortical Screws for 1.5mm

Length: 06mm To 12mm With 1mm Difference
Length: 14mm To 20mm With 2mm Difference

Cortical Screws for 3.5mm

Length: 10mm To 70mm With 2mm Difference
Also Available in Self Tapping

Cortical Screws for 2.0mm

Length: 06mm To 30mm With 2mm Difference
Also Available in Self Tapping

request a quote

Cancellous Screws

Cancellous Screws for 6.5mm (16mm Thread)

Length: 30mm To 120mm With 5mm Difference

Cancellous Screws for 6.5mm (Full Thread)

Length: 20mm To 120mm With 5mm Difference
Also Available in Self Tapping

Cancellous Screws for 4.0mm (Partial Thread)

Length: 10mm To 28mm With 2mm Difference
Length: 30mm To 60mm With 5mm Difference

Cancellous Screws for 3.5mm (Partial Thread)

Length: 10mm To 28mm With 2mm Difference
Length: 30mm To 60mm With 5mm Difference

Cancellous Screws for 6.5mm (32mm Thread)

Length: 45mm To 120mm With 5mm Difference

Cancellous Screws for 4.0mm (Full Thread)

Length: 10mm To 28mm With 2mm Difference
Length: 30mm To 60mm With 5mm Difference

Cancellous Screws for 3.5mm (Full Thread)

Length: 10mm To 28mm With 2mm Difference
Length: 30mm To 60mm With 5mm Difference

Washers for Screws

Washer for Cancellous Cannulated 7.0mm, Cancellous 6.5mm & Cortical 4.5mm
Washer for Cancellous 4.0 & 3.5mm, Cortical 3.5 & 2.7mm
Washer for Cortical 2.0 & 1.5mm

request a quote

Cancellous Cannulated Screws

Cancellous Cannulated Screws for 7.0mm (16mm Thread)

Length: 30mm To 130mm With 5mm Difference

Cancellous Cannulated Screws for 7.0mm (Full Thread)

Length: 25mm To 130mm With 5mm Difference

Cancellous Cannulated Screws for 4.0mm (Full Thread)

Length: 10mm To 28mm With 2mm Difference
Length: 30mm To 60mm With 5mm Difference

Cancellous Cannulated Screws for 3.5mm (Full Thread)

Length: 10mm To 28mm With 2mm Difference
Length: 30mm To 60mm With 5mm Difference

Cancellous Cannulated Screws for 7.0mm (32mm Thread)

Length: 45mm To 130mm With 5mm Difference

Cancellous Cannulated Screws for 4.0mm (Partial Thread)

Length: 10mm To 28mm With 2mm Difference
Length: 30mm To 60mm With 5mm Difference

Cancellous Cannulated Screws for 3.5mm (Partial Thread)

Length: 10mm To 28mm With 2mm Difference
Length: 30mm To 60mm With 5mm Difference

request a quote

Malleolar Screws

Malleolar Screws for 4.5mm

Length: 25mm To 80mm With 5mm Difference

Malleolar Screws for 3.5mm

Length: 25mm To 80mm With 5mm Difference

request a quote

Shaft Screws

Shaft Screws for 4.5mm

Length: 22mm To 60mm With 2mm Difference
Length: 64mm To 80mm With 4mm Difference
Length: 85mm To 110mm With 5mm Difference

Shaft Screws for 3.5mm

Length: 12mm To 40mm With 2mm Difference
Length: 45mm To 50mm With 5mm Difference

request a quote

Ashnis Screws

Ashnis Screws with Washer (Cannulated) for 8.0mm

Length: 60mm To 100mm With 5mm Difference

request a quote

Instruments For Bone Screws

Tap (With T-Handle) Dia 1.5mm
Tap (With T-Handle) Dia 2.0mm
Tap (With T-Handle) Dia 2.7mm
Tap (With T-Handle) Dia 3.5mm
Tap (With T-Handle) Dia 4.5mm
Tap (With T-Handle) Dia 3.5mm (Extra-Long)
Tap (With T-Handle) Dia 4.5mm (Extra-Long)
Tap (With T-Handle) Dia 4.0mm (Cancellous)
Tap (With T-Handle) Dia 6.5mm (Cancellous)
Tap (Quick Coupling End) Dia 1.5mm
Tap (Quick Coupling End) Dia 2.0mm
Tap (Quick Coupling End) Dia 2.7mm
Tap (Quick Coupling End) Dia 3.5mm
Tap (Quick Coupling End) Dia 4.5mm
Tap (Quick Coupling End) Dia 4.0mm (Cancellous)
Tap (Quick Coupling End) Dia 6.5mm (Cancellous)
SS Handle With Quick Coupling
Fibre Handle With Quick Coupling (Small)
Fibre Handle With Quick Coupling (Big)
Hexagonal Screw Driver Plain (Tip: 1.5mm)
Hexagonal Screw Driver Plain (Tip: 2.5mm)
Hexagonal Screw Driver Plain (Tip: 3.5mm)
Hexagonal Screw Driver With Simple Holding Sleeve (Tip: 1.5mm)
Hexagonal Screw Driver With Simple Holding Sleeve (Tip: 2.5mm)
Hexagonal Screw Driver With Special Holding Sleeve (Tip: 2.5mm)
Hexagonal Screw Driver With Special Holding Sleeve (Tip: 3.5mm)
Screw Driver Shaft Quick Coupling for 3.5 mm screws (Tip: 2.5mm)
Screw Driver Shaft Quick Coupling for 4.5 mm screws (Tip: 3.5mm)
Screw Driver Lane Type with Fibre handle
Screw Driver William Type (Lane Tip)
Screw Driver William Type (Hex. Tip: 2.5mm) for 3.5mm screws
Screw Driver William Type (Hex. Tip: 3.5mm) for 4.5mm screws
Tap Sleeve 2.7mm
Tap Sleeve 3.5mm
Tap Sleeve 4.5mm
Tap Sleeve 6.5mm
Drill Sleeve 1.5mm
Drill Sleeve 2.0mm
Drill Sleeve 2.5mm
Drill Sleeve 3.2mm
Drill Sleeve 4.5mm
Drill Sleeve 3.2mm Dia. For Semi Tubular Plate

Combined Drill & Tap Sleeve (1.1/1.5) (For 1.5mm Cortical)
Combined Drill & Tap Sleeve (1.5/2.0) (For 2.0mm Cortical)
Combined Drill & Tap Sleeve (2.0/2.7) (For 2.7mm Cortical)
Combined Drill & Tap Sleeve (2.5/3.5) (For 3.5mm Cortical)
Combined Drill & Tap Sleeve (2.5/4.0) (For 4.0mm Cancellous)
Combined Drill & Tap Sleeve (3.2/4.5) (For 4.5mm Cortical)
Combined Drill & Tap Sleeve (3.2/6.5) (For 6.5mm Cancellous)
Pointed Drill Guide (To Be Used With Insert Tap & Drill Sleeve)
Insert Tap Sleeve 3.5mm
Insert Tap Sleeve 4.5mm
Insert Drill Sleeve Dia. 3.5/2.5mm
Insert Drill Sleeve Dia. 3.5/2.7mm
Insert Drill Sleeve Dia. 4.5/3.2mm
Neutral & Load Drill Guide (For 4.5mm Cortical Screws & 6.5mm Cancellous Screws)
Neutral & Load Drill Guide (For 3.5mm Cortical Screws & 4.0mm Cancellous Screws)
Neutral & Load Drill Guide (For 2.7mm Screws)
Neutral & Load Drill Guide Long For Hip Surgery (For 4.5mm Cortical Screws & 6.5mm Cancellous Screws)
LC DCP Neutral & Load Drill Guide (For 4.5mm Screws)
LC DCP Neutral & Load Drill Guide (For 3.5mm Screws)
Mini Counter Sink Tip Dia. 1.1mm (For 1.5mm Cortical Screws)
Mini Counter Sink Tip Dia. 1.5mm (For 2.0mm Cortical Screws)
Small Counter Sink Tip Dia. 2.0mm (For 2.7mm Cortical Screws)
Small Counter Sink Tip Dia. 2.5mm (For 3.5mm Cortical Screws & 4.0mm Cancellous Screws)
Large Counter Sink Tip Dia. 3.2mm (For 4.5mm Cortical Screws & 6.5mm Cancellous Screws)
Mini Depth Gauge 30mm Scale Length
Small Depth Gauge 60mm Scale Length
Large Depth Gauge 110mm Scale Length
Measuring Scale with Drill Gauge 150mm
Hollow Mill with Quick Coupling
Hollow Reamer For 3.5mm Screw
Hollow Reamer For 4.5mm Screw
Hollow Reamer For 6.5mm Screw
Screw Holding Forceps
Screw Removal Forceps